Ascent® Max Ductless Fume Hood - With Transparent Back Wall (D-Series)
FiltraCheck™ Online Form Picture

The Ascent Max Ductless Fume Hood with transparent glass back wall gives maximum visibility, ideal for classrooms and educational demonstrations.


Key Benefits:
  • Certified to AFNOR NF X 15-203, BS7258, BS7989, ASHRAE110, EN14175-3
  • 5 years limited warranty
  • Large working area
  • Robust steel carcass construction
  • Isocide powder coating
  • Excellent aesthetics
  • Elegant and smooth sliding sash window
  • State of the art Sentinel airflow monitor and alarm system.

ISOCIDE

  • Grade 304 stainless steel work surface that will never rust, chip, or generate particles.
  • Lip at the front edge of the work surface ensures that any spillage is contained within the workzone.
  • A fully configurable Sentinel™ microprocessor control with audible and visual alarms for unsafe conditions.
  • Built-in 5000k warm white fluorescent lighting.
  • Front service panel opens up easily for immediate access for all maintenance functions.
  • Small Filter ID window to easily identify the type of filter being used.
  • Powder-coated, panel-mounted single electrical outlet provision.
  • Isocide™ antimicrobial coated structure eliminates 99.9% of bacterial presence on external surfaces within 24 hours.
  • All cabinet service and filter replacement can be carried out from the front, allowing the cabinet to be placed against walls in the laboratory to save space.
  • Electronic module behind the hinged front panel for easy access during troubleshooting and certification.
  • Retrofit Kit™ service fixture for air/water/vacuum/gas outlets.
  • Retrofit Kit™ Polypropylene drip-cup sink and epoxy powder-coated swan neck faucet.
  • Exhaust collar for added operator safety.
  • VOC sensor to monitor the chemical concentration within the cabinet workzone.
  • Base cabinet and support stand accesories.
  • Over 7 different Nanocarb™ carbon filter types, choose from: volatile organic compound, acid, mercury, sulphur, halogen, aldehyde or ammonia. 
FiltraCheck™ Online Form Airflow

  • Ductless fume cabinets provide operator and environmental protection from toxic vapors, gases and fumes.
  • The inflow moves from the ambient environment into the work zone through the cabinet front opening, with an average velocity of 0.5 m/s or 100 fpm. Additional inflow air taken through the AutoPurge perforations at the back of the work zone prevents fume accumulation for better operator protection. Negative pressure is created in the cabinet's work zone, with no outflow created to compromise operator safety.
  • The inflow flushes the entire work zone of the cabinet; within the main chamber of the cabinet, negative pressure (relative to the ambient environment) is maintained so that no chemical fumes or vapors escape the work zone.
  • Air is taken through a pre-filter and an activated carbon filter mounted in the interior. The pre-filter is built-in with the activated carbon filter, prolonging carbon filter life by removing large particulates before the they enter the carbon filter. The carbon filter removes all fumes from the exhaust air stream; filtered clean air is exhausted directly back to the room from the top of the cabinet.
  • The ductless fume cabinet can be remotely exhausted to the external atmosphere via a non-airtight thimble ducting system (optional), providing additional protection for the operator from volatile toxic chemicals used in high amounts, which normally would not be completely removed by the exhaust filter.